Blown-In Fibreglass Insulation & Spray Foam Insulation

Insulation Technical Info, CCMC Reports & Material Safety Data Sheets

Technical Insulation Information

Canadian Construction Materials Centre (CCMC) Reports

Material Safety Data Sheets (MSDS)

Blown-In Fibreglass Insulation: Compliance & Standards
  • Conforms to the product requirements of CAN/ULC-S702 and ASTM C764 Type 1 (pneumatic application)
  • R-values are determined in accordance with CAN/ULC-S702 and ASTM C687
  • Flame spread < 0 in accordance with ULC S102.2 and ASTM E84
  • Smoke developed < 5 in accordance with ULC S102.2 and ASTM E84
  • Passes the non-combustibility requirements of CAN4-S114 and ASTM E136 and is considered non-combustible by building codes
  • Passes the corrosiveness requirements of ASTM C764 and ASTM C665 (is non corrosive)
  • Passes the moisture absorption requirements of ASTM C1104 (does not absorb moisture)
  • When tested according to ASTM C1338 the insulation did not support mould growth
  • No formaldehyde binder added to the insulation
  • No chemical binding agents added